Saturday, June 10, 2023
Home » Blog » A Guide to Resolve Netgear Orbi Red Light Issue

A Guide to Resolve Netgear Orbi Red Light Issue

by ryaansao
0 comment
reset orbi router

Netgear Orbi is the best networking device ideal for streaming online videos and playing games. However, nowadays, users have been reporting that they are facing various issues with their device. Those issues that cannot be resolved without doing Netgear Orbi factory reset! And, one such issue is “Netgear Orbi red light”issue.

If you are also annoyed by the same issue, then this article is written for you. Here, we have provided the topmost reasons causing the issue along with the solutions to get it fixed in an instant. Let’s dig a little deeper!

Note: Although resetting the Orbi is the best solution to fix major technical issues related to the device, still we suggest you try the basic fixes first. And, if the basic fixes don’t resolve the red light issue for you, you can take the plunge to reset Orbi router.

Reasons: Netgear Orbi Router Red Light Issue

Given below are the topmost reasons why your Orbi router is blinking red:

  • Poor internet connection
  • Outdated router firmware
  • Loose or faulty connection between your Orbi and the internet modem
  • Insufficient power supply to the router
  • Use of damaged power socket
  • Technical glitches in the Orbi

Now, take help of the fixes highlighted below and know how to resolve the red light issue while relaxing on your couch.

Fixed: Netgear Orbi Red Light Issue

Fix 1: Reboot Your Netgear Router

Start troubleshooting the issue by applying the basic fix first i.e. rebooting the Orbi router.

Here are the instructions to give your router a fresh start by rebooting it:

Step 1: First of all, you need to unplug the router and disconnect it from your internet modem.

Step 2: Thereafter, what you have to do – wait for a couple of minutes before plugging in the router back.

Step 3: Now, you can plug in the router and reconnect it with the modem.

Now, see if you are able to do away with the “Netgear Orbi red light” issue. If not, then it seems that your router is not receiving a continuous power supply. Also, the router’s wall socket seems to be damaged.

All you have to do – ensure to choose a working wall socket for plugging in your router and it must take responsibility of providing steady power supply to your Netgear router.

Fix 2: Verify Orbi Router-Modem Connection

Another hack that you can try to get rid of the red light issue is to maintain a stable, finger-tight, and secure connection between your Orbi and the modem.

If the wire has been used for connecting your devices, then ensure that it is not worn out or damaged. Also, the wire should be inserted firmly into the router’s and modem’s Ethernet port.

But, if a wireless source has been used for making the Orbi router-modem connection, then you have to ensure a safe distance between your devices. In simple words, your router and modem should neither to be placed too close nor to be placed too far. Placing them in the same room would be a better option!

Still the Same?

Are you still going mad because of the same issue? If so, then it might be because of poor internet connectivity. Hence, for fixing the issue, check your internet connection and ensure that it is strong enough. Just in case, you find ups and downs in your internet connection, simply contact your ISP and ask him to get the internet-related issue fixed for you as soon as possible.

Fix 3: Perform Netgear Orbi Firmware Update

Outdated firmware version on your router leads to the “Netgear router red light” issue.

Thus, update the firmware of your router by accessing the web address.

Fix 4: Do Netgear Orbi Factory Reset

Even if after following the fixes mentioned above, the red light issue is still chasing you, it is suggested to reset Orbi router.

The reasons is, your router is not properly configured due to which you are facing the red light issue.

So, follow the guidelines mentioned below and know how to reset the router in a flash:

Step 1: Look for the router’s reset button.

Step 2: Press the button and wait for a few seconds.

That’s it! Your Netgear Orbi router is reset successfully!

As soon as you are done resetting your WiFi router, reconfigure it using the manual or the WPS method.

We hope that the fixes we have outlined above will help you fix the “Netgear Orbi red light” issue.

You can also read about Linksys Extender is Not Working?

You may also like

Leave a Comment


Bjorkspain is a digital platform created by XDR developers. We are a group of writers with one and single aim to answer your needs. Whatever you seek in the web world we try our best to answer it. You can contact us for an advertisement:

@2022 – All Right Reserved.