- Why did the firmware file of my Netgear extender get stuck?
- Is there a reason why Netgear extender firmware update failed due to this?
Are you going nuts trying to find the answers to these questions and resolve the issue at hand? Nodding your head in yes? Well then, know that you have nothing to worry about. In this article, we have discussed the topmost tactics with which you will be able to easily upgrade the firmware of your networking device via the mywifiext.local web address.
[Solved] Netgear Extender Firmware Update Stuck Issue
Before you follow the troubleshooting hacks given below, see if followed the correct steps to upgrade the firmware of your networking device. If not, then you need to do Netgear firmware update again. In case, this does not work for you, you know what to do.
- Download the Correct File
When you access the portal from where you are supposed to download the firmware file, you might have seen that it consists of the firmware version of not just your Netgear extender but also other models belonging to the same brand.
This brings us to the first reason why you are experiencing the Netgear extender firmware update stuck issue, i.e. incorrect firmware file download done. Chances are that rather than selecting the model number of your extender, you ended up selecting some other model.
To take care of the problem, you need to upgrade the firmware of your Netgear wireless range extender again and this time, make sure that you are downloading the correct file. We are hoping that this works for you. In case it does not, you can follow the next hack.
- Check the Internet Connection
Another reason why you are a victim of the Netgear extender firmware update stuck issue is because of a dropping internet connection. You need to understand that there can be two reasons why your internet connection might be disconnecting.
The first reason is that the cable connection between the extender and router is loose and the second reason could be that your Internet Service Provider is not dedicatedly working. We will tell you how to take care of both situations in the next paragraph.
In the first case, make sure that the cable is tightly connected to the ports of your devices and in the next case, call up your Internet Service Provider. If he agrees that things are not okay from his end, then give him some time to fix them.
- Install the Antivirus Software
Did the 1st and 2nd hacks fail to help you to troubleshoot the issue at hand? Well then, it might be because the system that you are using, i.e. a computer or laptop, is infected with viruses or other malicious software.
They might have invaded your system when you connected an external device to it. To eliminate this one of the reasons behind the issue that you are facing, it is recommended that you install the antivirus software on your device.
Once you are done installing it, do not forget to enable it. Otherwise, installing this software will turn out to be useless for you. Once you are done following these hacks, try to upgrade the firmware of your networking device using the extender’s SSID, i.e. Netgear_ext.
The Conclusion
With the hope of being helpful, we are ending our guide written on how to troubleshoot the Netgear extender firmware update stuck issue. Although you will be able to resolve this issue after following the troubleshooting hacks mentioned above, in case, you are still going bonkers because of it, then consider resetting your device and setting it up again.
Did you like going through this article? Nodding your head in yes? Well, consider dropping a comment in the section below for your fellow readers to read. You might be wondering how to do so, right? Know that it is quite simple. All you need to do is, enter what you have to say in the comment section and press the Enter key on your keyboard. In a couple of seconds, your comment will become visible.
We are anticipating that your fellow readers will appreciate this little effort made by you. In case, you do not believe us, then drop a comment and see for yourself.
