Saturday, June 10, 2023
Home » Blog » Two Methods to Reset Linksys Extender

Two Methods to Reset Linksys Extender

by ryaansao
0 comment
Linksys extender setup

Today, in this post we are going to tell you about the Linksys WiFi extender login process so that you can easily log in into your device to do its factory settings. To your knowledge, the reset process is very easy to perform. But are you aware of the things that happen after completing the reset of the extender? If not then don’t worry. We shall tell you every concept related to the reset process that you should know. Keep reading!

First, we would like to tell you about the reset. We want to tell you this because most of the users are not aware of the reset process and things that happen after performing it.

What Exactly Reset Is?

For your information, resetting is a small process that can be performed by users for different purposes. Once you set your Linksys extender to its factory settings, you get your device just like a new one. In short, after resetting the device customized settings are set to the default and all the current files are deleted automatically. But, most of the users are unaware of it and perform the reset process. As a result, they regret it.

Now, we will tell you about two methods to set the Linksys extender to its factory settings. The name of the methods is soft reset and hard reset. You can follow one of them according to your convenience. Below we have elaborated them in detail.

Reset Linksys Extender [Web Interface]

In this process, you need to access the default web address of your Linksys extender. All the steps are mentioned below. You can walk through the outlined steps:

  • First, you need to give the power to the Linksys extender through a power source.
  • Connect the extender and router with each other with Ethernet or wireless mode (You can use any one of them)
  • Turn on the computer or laptop for further steps.
  • Launch the web browser on your respective device.

Note: Ensure that you use the upgraded web browser for better outcomes. It is seen that the outdated browser does not support the extender default URL.

  • Type the default URL into the address bar carefully without making any typing mistakes.
  • You will see the Linksys extender login fields in which you need to fill in the credentials.
  • Click on the Log In button.
  • Linksys extender setup wizard will appear in which you need to locate the reset option.
  • Once you found the Reset option you need to click on it and follow the on-screen prompts.

Thus, these are the steps that you need to perform to reset the device through the web interface. Now, we tell you about the hard reset in which you need to perform a few steps only to get the successful process of reset.

Linksys Extender [Hard Reset]

Follow the following points to reset the device through the hard reset method:

  • Initially, you need to give the power to the extender and press the turn-on button of the device.
  • Now, you need to find out the reset button on the Linksys extender.
  • The reset button is usually located on the back panel of the device.
  • Once you find the reset button on the extender, you need to press it until your device is reset.
  • After some time, your device automatically restarts and is set to default factory settings.

Thus, these are the steps that you need to perform to reset the device through the hard reset process. Now, you will see your device settings are erased, but you don’t need to worry because you can customize them according to your taste again. To do this you just need to access the default web address and follow the home screen prompts to complete the setup of the Linksys extender hassle-free. After the setup is done, update its firmware to make the most out of the device. So, download the firmware file. But make sure that if you have done Linksys extender setup RE6300 done at your home, then you need to download the firmware meant for this model only. After downloading the firmware file, get it installed and enhance the extender’s overall performance.

You may also like

Leave a Comment

bjorkspain

Bjorkspain is a digital platform created by XDR developers. We are a group of writers with one and single aim to answer your needs. Whatever you seek in the web world we try our best to answer it. You can contact us for an advertisement: billstoke33@gmail.com

@2022 – bjorkspain.net. All Right Reserved.