There isn’t any doubt that Netgear WiFi range extenders are one of the best networking devices when it comes to taking care of the internet needs of every user across the globe. Every Netgear extender comes with a software called “firmware” which has to be updated on time. The latest firmware version helps in improving the overall functionality and performance of the Netgear extender to great extent. Performing Netgear extender’s firmware is pretty easy via www mywifiext net.
But, 9 out of 10 users are complaining that when they are trying to update the Netgear extender’s firmware, the process is taking time. Only because of this, do they interrupt the process in between. And, interrupting the firmware update process is not a good thing. Need not to worry! We can help you fix the issue. Over here, you will find some of the best hacks to fix the issue at hand. Hence, let’s start over!
Fixed: Netgear Extender Firmware Taking Time
Before you lose your temper or do anything to the extender, we suggest you wait patiently for some more time. Look, the firmware update process can take a longer time than usual. So, it is better to wait more for the process to get completed. Maybe having patience brings you luck!
Fix 1: Check Your Internet Connection
If you have waited for quite long and the firmware update process is still in “download pending” mode, then it can be due to a poor internet connection. The performance of your internet connection depends upon the services you are receiving from your ISP end.
Thus, contact the service provider of your internet connection right away. Ask him to provide you a good amount of internet speed. If he asks that your existing data plans need to be upgraded, just give him permission for the same.
Now that you are receiving good internet speed from the end of your service provider, see if the issue you are experiencing is resolved or not.
Fix 2: Pull Your Devices Closer
Another major reason that has led you to come across the issue is the distance between your devices. Thus, do the following to get rid of the issue and to update the Netgear extender’s firmware via www mywifiext net smoothly:
- Plug in your Netgear WiFi extender and your host router closer.
- If you have connected your devices using a wired source, make sure that the Ethernet cable is well working and connected firmly into the correct ports of your devices.
- The device (computer or laptop) you are using for the firmware update process must be in close proximity to the Netgear extender.
Now, to verify your internet connection and the connectivity between your devices by accessing mywifiext web address. Did you get mywifiext not working error? No? Hurray! Now, you need to check whether you rack up success with the firmware update process or not.
Fix 3: Check the Firmware Update Version
If your internet connection is working fine and you have placed your devices at a safe distance, then what would be the reason causing the issue. Might be you haven’t downloaded the correct firmware version as per the Netgear extender model you have.
Yes, you read it right! Firmware version varies upon Netgear extender model to model. Thus, to do away with the issue, we recommend that you download the firmware compatible with your Netgear extender’s model.
No Luck?
In case none of the fixes mentioned above helped you out, then you need to reset your Netgear extender back to factory default values. After resetting the Netgear device, perform new extender setup process from the scratch and update the firmware of your Netgear device keeping the aforementioned things into consideration.
This time, the Netgear extender’s firmware will surely not take time to download!
